Betekenis van:
divided up

Werkwoord

Voorbeeldzinnen

1. The United States of America has several divisions. It is first separated into the fifty states. Each state is then broken up into counties or parishes. Each county or parish is divided into towns or townships. These towns or townships contain the villages and cities.
2. The representative samples shall be made up of the sum of the individual samples, divided by three.
3. The present value of each year's cash flow (at 16,2 %) is then summed up and divided by the sum of the present value factors (equalling 5 years purchase at 16,2 %).
4. The amount so obtained shall be divided into two portions, the first portion extending up to EUR 50000000, the second comprising the excess; 18 % and 16 % of these portions respectively shall be calculated and added together.
5. First, the restructuring of CWP cannot be divided into two divisions (phosphates and phosphoric acid). CWP was a firm which was in difficulty and for which a restructuring strategy was drawn up.
6. For the purposes of the calculation referred to in point 17, the emissions to be divided shall be eec + el + those fractions of ep, etd and eee that take place up to and including the process step at which a co-product is produced.
7. One third, or one seventh, of the amount so obtained, according to the reference period established in paragraph 1, shall be divided into two portions, the first extending up to EUR 35000000 and the second comprising the excess; 26 % and 23 % of these portions respectively shall be calculated and added together.
8. The Commission notes that after completing the existing contracts and implementing the planned restructuring measures, SSN Nowa is supposed to be wound up and if there is any extra cash left it is supposed to be equally divided between Mostostal and the State.
9. In principle, the tariff quota should be divided up based on the proportions of the total quantity of the product supplied by that country during the three year period 2001 to 2003. However, it is noted that imports from Chile fell substantially (to below 3 % of imports to the Community) in the second semester 2003 due to technical reasons concerning border controls, which is approximately half of their normal share of imports to the Community.
10. The nomenclature to be used is the Geonomenclature (the country nomenclature for the external trade statistics of the Community and statistics of trade between Member States, originally drawn up by Council Regulation (EEC) No 1736/75 [1]) in force in the year to which the data refer.The code consists of four digits: the ISO alpha 2 standard code for each country from the abovementioned nomenclature, followed by two zeros (e.g. code GR00 for Greece), except for countries which are divided into two or more maritime coastal areas, which are identified by a fourth digit other than zero (from 1 to 7), as below:
11. In such cases, the relevant national central bank is responsible for informing the counterparties in advance of the arrangements to be made for transactions involving those branches. Open market operation: an operation executed on the initiative of the central bank in the financial market. With regard to their aims, regularity and procedures, Eurosystem open market operations can be divided into four categories: main refinancing operations, longer-term refinancing operations, fine-tuning operations and structural operations. As for the instruments used, reverse transactions are the main open market instrument of the Eurosystem and can be employed in all four categories of operations. In addition, the issuance of debt certificates and outright transactions are available for structural operations, while outright transactions, foreign exchange swaps and the collection of fixed-term deposits are available for the conduct of fine-tuning operations. Outright transaction: a transaction whereby assets are bought or sold up to their maturity (spot or forward). Pooling system: see collateral pooling system.
12. "All compensations available" (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine-tool model are considered. "Allocated by the ITU" (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services. N.B.:Additional and alternative allocations are not included. "Angle random walk" (7) means the angular error build up with time that is due to white noise in angular rate. (IEEE STD 528-2001) "Angular position deviation" (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position (ref. VDI/VDE 2617, Draft: ’Rotary tables on coordinate measuring machines’). "APP" (4) is equivalent to "Adjusted Peak Performance". "Asymmetric algorithm" (5) means a cryptographic algorithm using different, mathematically-related keys for encryption and decryption. N.B.:A common use of "asymmetric algorithms" is key management. "Automatic target tracking" (6) means a processing technique that automatically determines and provides as output an extrapolated value of the most probable position of the target in real time. "Average output power" (6) means the total "laser" output energy in joules divided by the "laser duration" in seconds.
13. "Aircraft" (1 7 9) means a fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle. N.B.:See also "civil aircraft". "All compensations available" (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine-tool model are considered. "Allocated by the ITU" (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services. N.B.:Additional and alternative allocations are not included. "Angle random walk" (7) means the angular error build up with time that is due to white noise in angular rate. (IEEE STD 528-2001) "Angular position deviation" (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position (ref. VDI/VDE 2617, Draft: ’Rotary tables on coordinate measuring machines’). "APP" (4) is equivalent to "Adjusted Peak Performance". "Asymmetric algorithm" (5) means a cryptographic algorithm using different, mathematically-related keys for encryption and decryption. N.B.:A common use of "asymmetric algorithms" is key management. "Automatic target tracking" (6) means a processing technique that automatically determines and provides as output an extrapolated value of the most probable position of the target in real time. "Average output power" (6) means the total "laser" output energy in joules divided by the "laser duration" in seconds.
14. With regard to their aims, regularity and procedures, Eurosystem open market operations can be divided into four categories: main refinancing operations, longer-term refinancing operations, fine-tuning operations and structural operations. As for the instruments used, reverse transactions are the main open market instrument of the Eurosystem and can be employed in all four categories of operations. In addition, the issuance of debt certificates and outright transactions are available for structural operations, while outright transactions, foreign exchange swaps and the collection of fixed-term deposits are available for the conduct of fine-tuning operations. Outright transaction: a transaction whereby assets are bought or sold up to their maturity (spot or forward). Pooling system: see collateral pooling system. Post-fixed coupon: a coupon on floating rate instruments which is determined on the basis of the values taken by the reference index on a certain date (or dates) during the coupon accrual period. Pre-fixed coupon: a coupon on floating rate instruments which is determined on the basis of the values taken by the reference index on a certain date (or dates) before the start of the coupon accrual period. Purchase date: the date on which the sale of purchased assets by the seller to the buyer becomes effective. Purchase price: the price at which purchased assets are sold or are to be sold to the buyer by the seller. Quick tender: the tender procedure used by the Eurosystem for fine-tuning operations when it is deemed desirable to have a rapid impact on the liquidity situation in the market.